Search results for "Experimental investigation"

Experimental Investigation on the Compressive Behaviour of Clay Brick Masonry Columns Confined by BFRP or Steel Wires

2016

This paper presents the results of an experimental research aiming to investigate on the compressive behavior of full size clay brick masonry columns reinforced with Basalt Fiber Reinforced Cementitious Matrix (BFRCM) or with steel wires collaring. Uniaxial compressive tests were performed on eight retrofitted columns and four control specimens. Two masonry strength were considered by varying the mortar grade. Results are presented and discussed in terms of axial stress-strain relationships, failure modes and crack patterns of the specimens tested up to failure. For the limit of investigated variables, comparisons with unreinforced specimens show the ability of these alternative techniques …

Mechanical Characterization of a Basalt Fabric for TRM Composites: Role of the Test Variables

2021

Textile reinforced mortar (TRM) materials are currently receiving great attention for the strengthening of reinforced concrete and masonry structural elements. Mortars with different strength classes have been coupled with different kind of synthetic fabrics, such as carbon, glass, steel, PBO. Recently natural fibres and, in particular, basalt fibres are receiving increasing interest since they proved to be a promising alternative to the most common synthetic fabrics, thanks to the reduced production costs and the consequent benefits in terms of environmental impact. This paper presents an experimental investigation comprising forty-one monotonic tensile tests on textile strips made with a …

Brain core temperature of patients before and after orthotopic liver transplantation assessed by diffusion weighted imaging thermometry

2018

Aims and objectives Methods and materials Results Conclusion Personal information References

Experimental investigation on the effectiveness of basalt-fibre strengthening systems for confining masonry elements

L’impiego di materiali compositi per il rinforzo di colonne in muratura è diventato una pratica ampiamente diffusa nel corso degli ultimi decenni. Questa tecnica, che consiste generalmente nell’applicazione di materiali polimerici fibrorinforzati (Fibre Reinforced Polymer-FRP), ha mostrato buone potenzialità, essendo in grado di garantire notevoli incrementi di resistenza e duttilità dell’elemento rinforzato, grazie ad un’azione di confinamento passivo. Tuttavia, l’impiego di compositi a matrice polimerica presenta alcuni limiti legati soprattutto alle prestazioni delle resine epossidiche, che a causa della loro natura sintetica danno luogo a problemi di compatibilità con il supporto murari…

Thermally Induced Structural Modification of Silica Nanoparticles Investigated by Raman and Infrared Absorption Spectroscopies

2010

We report an experimental investigation by Raman and infrared (IR) absorption spectroscopies on the structural modifications induced by isochronal thermal treatments on amorphous SiO2 nanoparticles (fumed silica). In particular, three different commercial types of this material, characterized by particle mean diameters of 7, 14, and 40 nm, were subjected to thermal treatments from 100 up to 1000 °C. We found that some properties of fumed silica, such as the SiOSi mean bond angle, ring size distribution, and surface adsorbed water content, are drastically different from those of common bulk silica materials and intimately related to the particles' dimension. The SiOSi mean bond angle, probed…

Experimental test results vs. analytical prediction of welded joint strength in hybrid steel trussed concrete beams (HSTCBs)

2013

The aim of the paper is to provide practical guidelines for the design of welded joints of steel truss for encased composite steel–concrete beams. The results of experimental tests are presented and interpreted. The steel truss is made of a steel plate acting as the bottom chord, made of S355 structural steel, coupled with steel rebars which form the upper chord, and steel inclined web rebars (V-reverse) welded to the two chord elements, both of them made of steel B450C. Butt welded joints of web bar to bottom steel plate and fillet welding joints of inclined web bars to top chord bars were tested, as they are different from the ones which are normally used due to the coupling of different …

Experimental validation of a direct pre-design formula for TLCD

2014

The passive control of vibrations has received in recent years a great deal of attention from researchers. Several types of devices have been proposed in order to reduce the dynamic responses of different kinds of structural systems. Among them, the Tuned Liquid Column Damper (TLCD) has proved to be very effective in reducing vibration of structures. However, since the equations governing the TLCD controlled systems response is nonlinear, the calibration of TLCD parameters is time consuming and not convenient to perform in a pre-design phase. In this context, it has recently been introduced by the authors a formula that allows to choose the optimal parameters of TLCD in a direct and fast wa…

Innovative modeling of tuned liquid column damper controlled structures

2016

In this paper a different formulation for the response of structural systems controlled by Tuned Liquid Column Damper (TLCD) devices is developed, based on the mathematical tool of fractional calculus. Although the increasing use of these devices for structural vibration control, it has been demonstrated that existing model may lead to inaccurate prediction of liquid motion, thus reflecting in a possible imprecise description of the structural response. For this reason the recently proposed fractional formulation introduced to model liquid displacements in TLCD devices, is here extended to deal with TLCD controlled structures under base excitations. As demonstrated through an extensive expe…

Combining TMD and TLCD: analytical and experimental studies

2017

Abstract In these years several research efforts have been focused on developing efficient and reliable control devices for mitigating the structural response of tall and lightly damped buildings in case of strong dynamic excitations, such as wind and earthquake ones. In this context, Tuned Mass Dampers (TMDs) represent probably the most common control device due to their high control performances. On the other hand, Tuned Liquid Column Dampers (TLCDs) are increasingly becoming more popular because of some of their attractive features, cost-effectiveness among the others, even though they yield slightly less control performance compared to the classical TMDs. Aiming at combining the benefic…

Reward networks changes in the brain of pathological gamblers: a resting state functional magnetic resonance imaging study

2017

Aims and objectives Methods and materials Results Conclusion Personal information References